Teamgee Seahorse Remote Control with LCD Screen for Teamgee H5/H9/H20/H20T/H20MINI

$49.99

Free shipping worldwide with airmail with tracking. If you order with the skateboard we will put the accessories with the skateboard. But if you place the accessories alone, we will use airmail shipping.

1. Instruction for Remote Control Code

  • Under normal circumstances, the code program of each board and the supporting remote control has completed when the product leaves the factory, so consumers do not need to code again. However, when you accidentally lose the remote control or buy a new remote control or the remote control is damaged and repaired, the code must be completed before use.
  • Steps:
      A.   Previous version Seahorse remote control with code key

       1 . First turn on the power of the board.

  1. Long press the power button of the board for about 5-8 seconds and release the button after the power indicator of the skateboard starts to flash.
  2. Turn on the power of the remote control.
  3. Use a toothpick or a paper clip to click on the remote control’s code key. At this time, the power indicators of the board and the remote control shall flash at the same frequency.
  4. Restart the key to turn on the skateboard and the remote control, and then it can be operated normally.
    B. New version Seahorse remote control

    1. First turn on the power of the board.

    2. Long press to power switch for ten seconds on the skateboard.

    3. Pressing Speed button and Setting button simultaneously to complete the pairing process.

2. How to switch kilometers and miles? (only work on new version remote control )
Pressing Setting button and Power switch button simultaneously, then rolling throttle on remote to change between kph and mph.


3. How to reset the remote?
Press Setting button and Power switch button simultaneously, then enter the settings mode to reset the throttle position. After entering the settings mode, roll throttle to browse different options on the remote interface and then toggle speed button to select settings options.  When the THUMBNHEEL shows "OK", means the reset was successful.

Screen display interpretation

 

1&2. Battery status of remote&skateboard.
3. Cumulate mileage.
4. Single mileage.
5. Current value.
6. Real-time speed.
7. Max speed of a single ride.
8. Forward/ Backward.
9. Speed mode.
10. Brake mode.
11. Connection signal.

Questions & Answers

Have a Question?

Ask a Question
  • Can you pair this remote o the h8?

    Hi, sorry that this remote isn't compatible with H8.

  • Does this model have a cruise control feature?

    Hi, yes, this model has the cruise control feature.

  • Kann ich die Fernbedienung mit der alten Version des h5 verbinden denn da ist noch die alte Fernbedienung dabei gewesen

    Hi, yes, you can use the old version remote of the H5.

  • Does this remote connect to the H6 long Board? If not which remote will and where can I find it?

    Hi, This remote can't compatible with the H6. But you can purchase this one and leave a note on our website when you complete the payment.Then we will send your the H6 remote.

  • How long dose it live for?

    Hi,The remote control can be used for several years, if there is no drop or impact.

  • my remote to my team g h20t won't charge at all is there anything I can do

    Hi, please try to use another charging cable for a try. If the problem still remains, please send an email to market@teamgee.com with your order number and the problem detail. Our support team will help you solve the problem. No worries.

  • In the settings menu to change the units of measurement from km to miles, there is a speed option that is not talked about in any of your manuals. Does this change the reading that the remote reports or the speed of the board itself?

    Thanks for your question. The new version remote comes with a speed and distance reading function in miles. The old version Teamgee sea horse remote has only speed and range display in KPH/KM. Please click this link for more details on the newest remote control: https://www.teamgee.com/blogs/blog/the-latest-remote-control-is-coming-by-teamgee

  • Does this remote control work with the H20 mini ?

    Hi, this seahorse remote control is compatible with the new version of H20MINI. 

    We recently launched a new version of H20MINI with LINGYI ESC instead of Hobbywing.

    But if your H20MINI comes with the Hobbying ESC, please order this remote if you need replacement: https://www.teamgee.com/collections/skateboard-accessories/products/teamgee-remote-control-for-teamgee-h20-mini

  • Can I use a universal remote control for replacement?

    Hi, the remote control must be compatible with the mainboard built-in your board. So universal remote is unlikely can pair with it.

  • Does the remote come with a charger

    Sure, the remote come with a charger.

  • Hello, I just paired the skateboard and only two front wheels are moving..

    Hi, for more details. Please take a video and contact at market@teamgee.com.

    Our support team will help you.

  • The remote we received does NOT have the Control Code Key.... no hole to put in a paper clip. No holes anywhere. What do we do?

    Hi, hope this link will help you: https://www.teamgee.com/blogs/blog/the-latest-remote-control-is-coming-by-teamgee

  • there is no hole on the back of the seahorse to click on. please let me know what I have to do.

    Hi,

    The seahorse remote has the new version.Hope this link will help you.https://www.teamgee.com/blogs/blog/the-latest-remote-control-is-coming-by-teamgee

  • Hi, where can I download a user manual for this remote? I cannot find it anywhere. My question is how to set cruise control mode and how to change the brake modes. Thanks!

    Hi there. Thanks for your contact.
    This is the user manual : https://www.teamgee.com/pages/user-manual-download Please send a photo to market@teamgee.com of your remote for more details.
    Waiting for your reply and have a nice day!

  • Is there a warranty on the Remote?

    Hello,

    YES, remote come with 3 months warranty.
    But when you riding you dropping the remote and make the remote can't work, this is not cover in it.

  • The new model doesn't have a code key hole. How can I pair it? Where can I find the manual? It wasn't in the box

    This is the video for you to refer: https://www.youtube.com/watch?v=ipp7kOGEpYQ

  • Can this remote go into mph instead of kmh?

    The remote control only supports display kmh.

  • I don’t understand what the manual says about when the remote is fully charged. It says to open remote control switch machine key. I do not know what that is and cannot find it in the manual. Does the lightning bolt only appear while it is charging? Does the lightning bolt disappear and the power indicator just show a full bar of electricity when fully charged?

    When fully charged the power indicator show a full bar of electricity.

  • Is it possible to disable speed modes? Can I disable H+?

    Sorry to tell you that it can't disable H+.

  • Hi, Is there any remote which has a display and is working with the h3 diy kit?

    These remote with a display are not compatible with H3 DIY kit.

  • Can the remote be set to MPH instead of KPH?

    Sorry, the remote doesn't have this kind of settings. We will consider to add this function on it in the future. Thanks for your contact.

  • Do you have plans to turn this remote compatible with h5 skateboard? Recently I had an accident and if the break can be more soft or smother I believe many others accidents could be avoided. Thanks.

    The seahorse remote is compatible with H5. But the brake strength will not change unless the mainboard is upgraded too.
    The H5 we are selling now is a new version that has four different brake modes.

  • Hello Can I pair this controller with any board? As with working with Trampa mountainboards? Thanks Dayle

    Instruction for Remote Control Code Under normal circumstances, the code program of each board and the supporting remote control has completed when the product leaves the factory, so consumers do not need to code again. However, when you accidentally lose the remote control or buy a new remote control or the remote control is damaged and repaired, the code must be completed before use. Steps: 1 .First turn on the power of the board. Long press the power button of the board for about 5-8 seconds and release the button after the power indicator of the skateboard starts to flash. Turn on the power of the remote control. Use a toothpick or a paper clip to click on the remote control’s code key. At this time , the power indicators of the board and the remote control shall flash at the same frequency. Restart the key to turn on the skateboard and the remote control,and then it can be operated normally.

  • I got the H9 during the Indiegogo campaign and it came with the older remote. Does this work for that H9 and are there any firmware updates needed? Would like to have the option of different acceleration and braking. Older remote only offers 2 acceleration options and 1 braking.

    Instruction for Remote Control Code Under normal circumstances, the code program of each board and the supporting remote control has completed when the product leaves the factory, so consumers do not need to code again. However, when you accidentally lose the remote control or buy a new remote control or the remote control is damaged and repaired, the code must be completed before use. Steps: 1 .First turn on the power of the board. Long press the power button of the board for about 5-8 seconds and release the button after the power indicator of the skateboard starts to flash. Turn on the power of the remote control. Use a toothpick or a paper clip to click on the remote control’s code key. At this time , the power indicators of the board and the remote control shall flash at the same frequency. Restart the key to turn on the skateboard and the remote control,and then it can be operated normally.

  • Hi I just bought a H9 and didnt get the instructions for the remote can I find them somewhere?

    in the manual
    Also on our website teamgee.com

  • Superhappy with my H9 but how to change the braking strenght? (B1, B2, B3 & B4 on the remote)

    You can find it in the manual

  • Can I pair this remote with the H5? I'm thinking yes. Is this just a new option or an upgrade? It is nice to have options.

    Sorry 
    You can not

  • Will remote work with H5?

    yep

  • Hello! Remote control is set to P (i think parking mode) when starts. I need to push it backwards first, and only then i can accelerate. Is that normal? And can i switch this function off?

    Hello, it is normal. It is the newest function preventing accidental touch. sorry that I think we can't change it currently. (19/12/2022)

  • What type of charger is it for the seahorse charger.

    Dear customer, the charger of the seahorse remote is Type-C.

Teamgee Seahorse Remote Control with LCD Screen for Teamgee H5/H9/H20/H20T/H20MINI
You have successfully subscribed!
This email has been registered